Waste Oil Refinery Distillation Plant/Production Line

• Transmission Type: Flexible, Flexible
• Rhythm: Flow Production Line
• Automatic Production Line: Comprehensive, Assembly
• Model NO.: CMT
• Production Scope: Product Line, Product Line
• Flexible Production: Intelligent Manufacturing
• Condition: New
• Automation: Automatic, Automation
• After-sales Service: Engineers Available to Service Machinery Overseas
• Certification: ISO, CE, SGS
• Production Capacity: 10tons

Product Description

1. 1. Process Description
   


2. ump the waste or crude oil into the preheat reactor and start to burn the hot air stove(by coal,fuel oil,natural gas or wood).
3. The hot air goes into the smoke pass of the main reactor to preheat the main reactor.And after,the hot air will go into the the pass of the preheat reactor to preheat the inside oil to remove the water content.
4. Pump the preheated oil from preheat reactor into main reactor,and the temperature will goes up gradually.
5. When the temperature of preheat reactor goes up to 120sºC,there will be some gasoline generated from through the gas collection tower.The gasoline will go into the cooling pipe and become liquid gasoline.The the liquid gasoline will goes into the gasoline tank.
6. When the main reactor temperature reaches up to 360ºC,there will be oil gas generated and go through the distillation tower into the fractionation tower,where the oil gas will be separated into diesel and gasoline.The diesel gas will goes into its cooling pipe to be cooled into liquid diesel and goes into diesel tank.The gasoline gas will goes into its cooling pipe to be cooled into liquid gasoline and goes into gasoline tank.
7. Pump the diesel into oil washing tank to remove the black firstly and then pump into neutralization tank for neutralizating the acid content and then pump into the filtering tank to filter all the impurities.
8. After refined,pump the refined diesel and into final diesel storage tank.Pump all the gasoline into gasoline(which no need further refined) storage tank.
9. Unliquified gas,which is flammable,will go through two water sealing system(anti-fire back) into the hot air stove.This kind of gas will be recycled as fuel to save energy.
10. The smoke from the heating source will goes into the dust removing system to be cleaned and emmitted into the air with no any pollution.

2. Diagram in 3D

3. Tichnical Parameters

External dimension of reactor (Diameter*Length)	φ2000mm*10000mm*16mm (Q345R boiler plate)
Material	Tire oil , Waste rubber oil, Waste plastic oil,Waste engine oil, Crude oil,all kind of fuel oil, all kinds of heavy oil,lubricating oil, waste cooking oil etc.
Material of Boiler	Q345R Boiler Steel plate 16mm thickness
Oil yield	85%
Structural Form	Horizontal
Heating source	Coal
	Wood
	Natural gas(need gas burner)
	Fuel oil(need oil burner)
Mode of cooling	Water cooling
Working form	Continuous
24 hour disposal amount	10tons of waste oil
24 hour oil yield	About 8.5 tons
Power in total	About 20kw
Working pressure	Normal pressure
Water needed	400kgs/h(recycled)
Heating mode	Indirect heating
Noised B(A)	≤65
Working position	2
Area covers	600 square meters

4. Final Products