- Transmission Type: Flexible
- Certification: SGS
- Rhythm: Flow Production Line
- Capacity: 250kg/H
- Trademark: CMT
- Origin: Jiangsu Suzhou
- Automatic Production Line: Assembly
- Automation: Automation
- Production Scope: Product Line
- Fuel: Natural Gas
- Specification: SGS
1. Main Technical and economic index of production line.
Total pulling capacity
Process technical index
Gross ribbon width
Total rate for made-up articles
Main raw material dosage
Compressed air consumption
Compressed air consumption
Total water consumption
Power supply and distribution
Total installed power
Installed power in normal
2.Sheet Glass Equipments List Supplied by The Seller.
Raw material workshop
permanent magnetic iron remover
raw material and batch making electric control
steel structure of the furnace
process equipment of furnace
exhaust emission system
damper of main flue
branch flue damper
other accessory equipments
hopper wall vibrator
single valve gate
The electrical control cabinet of the above equipments.
Computer control system
automatic reversing control
temperature detecting system for the furnace
linkage of batch charging and glass liquid elevation
Thermal resistance and flowmeter thermocouple etc
Detector of furnace pressure
Measuring device of glass level
System of The natural gas
Oil system (as standby)
compressed air system
3. Process flow
(1)The batch prepared by raw material workshop is transported to the bin at the head of the furnace by the batch belt, one feeder under the bin are installed to push the batch uniformly to the furnace for melting purpose.
(2)Furnace using natural gas as fuel. Natural gas by spray gun into the furnace, the combustion air via the air exchanger by reversing, the branch flue into the regenerator, after injection into the furnace and gas burning heating furnace after the mixing of small batch and glass liquid.
(3)The batch turns into glass metal after melting, and it enters the molding room through the channel after the process of clarity, uniformity and cooling, and it is molded after pulling and finally enters into the annealing lehr.
(4)After entering into the annealing lehr, glass belt will go through the processes of heating, symmetrical heating, heat preservation, slow cooling and rapid cooling etc. This is to reduce the internal stress produced during the process of molding and cooling to meet the quality requirement of cutting. At last the temperature of glass belt falls to about 70ºC and then it is transported into the cutting zone.
(5)After the glass ribbon is out of the annealing lehr, it will go through the operation of automatically cutting, severing etc. The glass after severing shall enter into the acceleration separation roller for separation and then get into the process of edge severing. After manually collecting and packaging, the qualified glass will be transported to the finished product warehouse by forktruck. A cullet bin is installed under the edge severing section of the production line to collect the cullet. And it will be transported to the cullet load material system by trucks and then delivered to the bin at the head of the furnace.
For more information, please contact us at any time.