1. Specification of production line
Product: inner tube for motorcycle.
Production capacity: 2000-2500 pcs/ 8 h
It needs 15-20 persons for one shift.
2. Main machine list
|1||Vertical Rubber Cutting Machine|
|3||Two Roll Rubber Mixing Mill|
|4||Two Roll Rubber Mixing Mil|
|6||Tube Extruder And Cooling Line|
|7||Tube Splicing Machine|
|8||Inner Tube Curing Press|
NO.1 Vertical Rubber Cutting Machine
Cutting Width(mm) 660
Diameter of the piston(mm) 150
Time taken by the stroke(s) 16~25
Overall Dimension (mm) about 1900×720×2580
Weight(kg) approx 1000
This vertical rubber cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
This vertical rubber cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The nylon plate is installed on the base under the cutting knife for protecting the edge of the cutting knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
NO.2 Rubber Kneader
Mixing capacity 20L
Driving motor 30KW
Tilting motor 1.5KW
Tilting angle 110
Water cooling(for rubber) 0.2-0.4Mpa
Steam heating (for plastic) 0.5-0.8Mpa
Electricity heating(for plastic) 9.0KW
Machine weight 4500kg
Machine size 2500×1480×2500mm
Rubber kneader is mainly used for natural rubber, synthetic rubber, plastic, rubber and plastic refining and mixing, rubber and plastic blending, alsobe suitable for various kinds of low viscosity materials of blending.