Capacity: 200 PCS /Min
Product: Classic baby diaper
Workers needed per shift: 6-8
Functions:
1. It can produce 4sizes: S,M,L,XL
a) Diaper structure:
b) Including fluff core wrapped by tissue paper supplying units, SAP supplying devices, waistband, ADL, leak cuff, leg guard, frontal tape, side tape and bottom film supply devices.
2. One set High Speed Crusher: Saw blade head adopts hard alloy material, can crush all kinds of fluff pulp 450kgs/hour.
3. Fluff core adopts direct feeding unit, wrapped by tissue paper.
4. Mitsubishi PLC +touching screen + frequency control system
5. Two sets US made FIFE web guider use for ADL sheet and waistband unit.
6. Machine has mechanical unwinding and tension controlling for raw materials. Raw materials have spare materials feeding shafts excluding frontal tap, side tape and elastic ribbon, convenient changing materials, reduce shut-down times.
7. SAP adding amount controlled by non-step regulator.
8. Machine adopts frequency converter controlling. Conveying part adopts synchronous belt and gear box combined together.
9. Except glue, elastic ribbon and fluff pulp, all the other raw materials have auto checking when any of the raw materials lacking or breaking off, the machine can be shut off automatically at the shortest time to decrease the defective.
10. Machine can be controlled remotely, timely monitoring machine working programs, and can remote maintenance and solve programs problem
Demands that factory-set-up should meet
1. Without vibration, clean and clear environment, good ventilation, no flammable and explosive and corrosive substances around.
2. Flat concrete ground, concrete number should be at least 300#; ground level difference should be within 15-25mm, so that machine adjustment is more convenient.
3. Ground should have enough bearing capacity. Concrete ground thickness is no less than 200mm. If machine is put on the 2nd floor, concrete floor average bearing capacity is at least 3.5tons/sm. machine is put no more than on the 2nd floor.
4. To keep at least 1 meter distance between the back side of machine (including attached equipment) and the walls.
5. To prevent the accident due to the uneven ground.
6. The inside temperature in the factory is no less than 12-15ºC.
Type |
CMT-250 |
Desigh speed |
130M/Min |
Practical speed |
200pcs/min |
Installed capacity |
85KW |
Practical capacity |
75KW 160A |
Breaker capacity |
250A |
Machine size |
24x3.2x3m |
Working space |
28x6x4m |
Machine weight |
22T |
Air compressor |
1.4m3/min |
Project brief: