Glass Plant / Glass Production Line (Turnkey Project)

• Customization: Available
• Condition: New
• Automation: Automatic, Automation
• Model NO.: Whole machine line
• After-sales Service: Engineers Available to Service Machinery Overseas
• Transmission Type: Flexible
• Automatic Production Line: Assembly
• Flexible Production: Intelligent Manufacturing
• Rhythm: Flow Production Line
• Production Scope: Product Line
• Certification: SGS
• Main Workshop (Single Furnace): L*W*H =120*20*10m
• Auxiliary Workshop: L*W*H =80*6*6m
• Raw Material Area: 1000m2
• Finished Product Area: 2000m2.
• Design: 50 Days
• Material Purchasing: 80 Days
• Construction: 90 Days
• Heating-up to Taping: 22 Days
• Specification: SGS
• Trademark: CMT
• Origin: Jiangsu Suzhou
• Production Capacity: 40t/D

Product Description

I. Main technical parameter:
1. Melt ability on the 1st: 40t/d
Fold into glass thickness is 5 mm, Daily output is 2600 m²
2. Product varieties: Colourless transparent glass;
3. Product specifications: Thickness range 2- 10mm;
4. The width of original board of glass: 2400mm;
5. Product quality: Accord with the national standard in the People's Republic of China;
6. Comprehensive yield: 80%
7. Unit utilization ratios: 97.5%
8. Melts the life-span of the kiln: 4

1. Raw materials (The qualified powder material enters the factory)
1.1 Conditions of quality of different raw materials


Note: The accurate requirement of different raw materials should be decided after the quality of the raw material is confirmed. 

2. Fuel: Natural gas:

3. Supply power:
3.1 Demands consist of two pieces of independent power, so as to ensure that supplies power incessantly.
3.2 That enters factory's voltage:10KV±5%, frequency 50Hz± 1%, supplies power steadily in succession.
3.3 Supply power in workshop:
Voltage 380V/220V±10%, frequency 50Hz.
3.4 The installed capacity of  factories of equipment invites :100KVA;
Calculate load in normal production: <60kwh. 

4. Pictures


 

SN.	Project
1	Raw materials workshop
2	Production unites the workshop
2.1	Melt the section
2.2	Shaping section
2.3	Section that anneal
2.4	Cut and judge the section of the finished product
2.5	Bits of broken glass system
3	Affiliated facility
3.1	Compress the air and stand
3.2	Circulating water system
3.3	Laboratory
4	Support the distribution system
5	System ofNatural gas
6	Installation and cold adjustment (cold adjustment is about 120days)